Call Today

Have you been trying to find help and advice concerning How to Install a Direct-to-Stud Shower Enclosure?

A successful shower installation needs mindful preparation and also a lot of work. Most of the times, you will require to do 3 types of tasks: mounting wall surfaces, installing the plumbing, as well as finishing walls.

Preparation

First of all, you need to decide on the type of shower that you wish to set up. It is necessary to ascertain whether the picked shower is capable of coping with certain systems and can control a risk-free degree of water with the central heating boiler. Many shower units nowadays are developed to be adaptable to different water pressures (such as stored warm water as well as cool keys).
It is also important to think about the water stress as well as the planning of the piping and drain for the shower

Various Types of Shower Units

• Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower system can be attached to the bathroom tap based on your need, and also the water temperature can be changed via the faucets. Push-on mixers are cheap and very basic to install. Nevertheless, although the hose connection is basic, it is easily removed. In addition, it is bothersome to adjust the temperature level.


• Bath/Shower Mixer: The hose and spray of this kind of shower are combined with a bathroom mixer faucet, as well as the temperature can be changed through the bath taps. It is a very low-cost choice and no added plumbing is involved. Nonetheless, the bath/shower mixers likewise experience troublesome temperature level control options.


• Manual Mixer: The pipe and spray of a manual mixer shower unit are a part of the wall system and also the cold and hot water products are connected to a solitary valve The temperature and also stress of the water are managed via either one or a selection of handles (in much more expensive showers). Although temperature level control is much easier in hands-on mixer types, they are a lot more costly than the formerly discussed mixers. They additionally need added plumbing of hot and cold water pipelines.


• Thermostatic Mixer: The hose pipe and also spray of this shower type belong of the wall surface unit and the cold and hot water products are attached to a solitary valve right here as well. It is full with a built-in stabiliser to self-adjust the water temperature level as well as to stop it from becoming too warm. One of the largest benefits of a thermostatic mixer shower type consists of convenient temperature level control. Nevertheless, it is the most expensive of the various mixer options.


• Power Shower: A power shower is a solitary device containing a powerful electrical pump that is capable of modifying both the water pressure and temperature level. This type of shower can be fitted if there is supply of water from a cold water cistern and also a hot water cyndrical tube. A power shower makes the modification of both stress and also temperature level simple. On the other hand, it disagrees for water heated up straight by the shower or where the water is supplied by a combination boiler under keys pressure.


• Electric Shower: An electrical shower is plumbed right into a mains cold water supply and it heats up the water electrically. It is necessary to keep in mind that for this shower kind to be set up, the keys pressure requires to be at the very least 0.7 kg/sq cm (10lb/sq in). The device allows the temperature as well as stress to be adjusted via a knob. Models with temperature level stabilisers are much better as they remain unaffected by other faucets in other places in use within the house. A major disadvantage of electric showers is that the control handle just enables the choice of high temperatures at much less stress, or lower temperature levels at a greater pressure. This is problematic in the winter when the spray is typically weak as well as the mains water is cooler. Nevertheless, this trouble is taken on in some designs which are offered with a winter/summer setting.

 

Technique

Depending on the type of shower you wish to install, the shower head should either be suited order to prevent its contact with the water in the bathroom listed below or the base tray, or it must have a check valve.
Prior to starting, it is suggested to mark the positions of the shower head and control, as well as to prepare the pipe-work entailed. Furthermore, the drain system to remove the waste water will certainly need to be intended. Both placements of the cable television route as well as the shower switch will also require to be considered if an instantaneous or electric shower system is being mounted.
Use the guideline guide provided with the shower system to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is necessary to remove the water supply. In order to shield the pipes, they ought to be given a water resistant covering as well as likewise fitted with separating shutoffs. The pipes can then be hidden right into the wall surface and also plastered over to neaten the overall look.
Fit the base tray, shower head, as well as installations.
Link the main shower control to the pipes that will be supplying the water (This might require a women screw string adapter).
Reconnect the water supply and test the pipelines for any kind of leakages, as some may require tightening.
If you are mounting an electrical shower, remember to switch off the electrical power supply before making any type of electrical connections. As soon as these connections have actually been made (there must be assistance within the instruction manual), the power supply can be switched back on.

Adjusting Water Stress to Fit Your Shower

The cold water tank can be raised to a greater elevation (in some cases as little as 150mm (6inches)) by fitting a strong wood assistance underneath it - potentially composed of struts as well as blockboards. If you pick this choice, the main and also circulation pipelines will additionally need to be elevated to satisfy the new height of the tank.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is chosen, it has to be linked right into the power supply in order to run.

Piping and also Water drainage

It is best to utilize 15mm diameter supply pipes, and make the go to the shower as brief as well as straight as feasible so regarding maintain optimal stress as well as reduce heat loss. Additionally, by reducing making use of joints for pipeline edges, you can reduce the resistance in the circulation of the water system. You can attain this by bending the pipelines instead.

Many Common Errors

• Breaking or neglecting local code limitations.


• Using pipelines that are as well tiny.


• Connecting copper to galvanized without making use of a brass or dielectric fitting in between the two.


• Not making use of tape or pipeline compound at threaded joints.


• Not leveling your fixtures when installing them.


• Not setting up an air gap filling up for fixtures.


• Reducing supply stub outs too brief to mount the shutoff valves onto after the completed wall remains in area.


• Not properly straightening tubing into installations or stop shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will create a leak.).


• When transforming the water back on in your house, constantly run the outdoors pipe shutoff or purge your toilets to bleed dirt and air from the lines. This particles can create problems in your sink faucets and also various other plumbing trim.


 

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As a fervent reader about How to Install a One-Piece Shower Unit, I assumed sharing that editorial was really useful. Sharing is good. Helping others is fun. Thank-you for taking the time to read it.

Estimate